Broadband-Hamnet™ Forum :: Hardware
Board Index Latest Posts Welcome Guest   [Register]  [Login]
 Subject :Ubiquiti Bullet M2-HP doesn't see other Linksys Mesh Routers.. 2014-07-18- 11:08:05 
W6kl
Member
Joined: 2013-06-08- 23:43:21
Posts: 3
Location: 

I have two Linksys WRT54G's that "see" each other on the mesh.  Today I flashed a Ubiquiti Bullet that I can access with no apparent problem.  However it doesn't "see" the Linksys units and they don't detect it's activity.  All units are on channel one........any thoughts about where I went wrong.

I'm new to HSMM so presume it's operator error.

TNX,

David Reid W6KL

Burbank, Calif.
IP Logged
 Subject :Re:Ubiquiti Bullet M2-HP doesn't see other Linksys Mesh Routers.. 2014-07-18- 11:34:15 
K6AH
Member
Joined: 2012-03-05- 10:47:45
Posts: 181
Location: San Diego, CA

Please confirm:

  • All are on the same release (e.g. BBHN 1.1.x)
  • All use the default SSID
  • None are Ethernet-connected to each other (the only network they share is the RF Mesh)
  • You haven't modified the OLSR Secure key
  • The Linksys nodes haven't decided to mesh on a channel other than 1

Andre, K6AH
IP Logged
Member of:
Beta Test Team
San Diego Mesh Working Group
Running 3.0.1
 Subject :Re:Ubiquiti Bullet M2-HP doesn't see other Linksys Mesh Routers.. 2014-07-18- 14:14:47 
W6kl
Member
Joined: 2013-06-08- 23:43:21
Posts: 3
Location: 
Thanks Andre.........fixed........"same release problem" was the issue. The Linksys routers were an earlier release. Updating them fixed this issue. Great help.........73, David
IP Logged
 Subject :Re:Ubiquiti Bullet M2-HP doesn't see other Linksys Mesh Routers.. 2014-07-18- 16:14:49 
K6AH
Member
Joined: 2012-03-05- 10:47:45
Posts: 181
Location: San Diego, CA
That's great David. The first 2 digits of the release number defines the compatibility... as does the default SSID. Andre, K6AH
IP Logged
Member of:
Beta Test Team
San Diego Mesh Working Group
Running 3.0.1
Page # 


Powered by ccBoard


SPONSORED AD: